Planks are normally stapled to the forms, but we have added outer ribs to the forms so that they can be clamped using wedges. This adds to the aesthetics of the canoe by eliminating all of the small marks left on the finished canoe by the staple holes.
Small dowels are placed in the fragile cove edge to protect it from the bungee cord (which also clamps the planks together). Dowels are only used in the bow and stern areas where planks will be added later. Protection isn't needed in other areas because that edge will be sanded flat and will be part of the gunnels.
The planking progresses by adding planks to alternating sides. This is where the numbering on the planks is used to keep the color scheme similar on each side. This is most important when planking the bottom because both sides are seen next to each other.
On this canoe, the dark accent strips were taken from a very dark cedar board and the white strip is from a spruce/pine board.
More planks will be added where the blue tape is after the bottom has been completed. The added planks will make up the raised bow and stern section which will give it a traditional look befitting of this type of canoe.
